Channels An investigation on the influence of various heat treatments of Nb-Ti-V and V-N microalloyed steels for high strength and low-temperature impact toughness
The study of austenite grain growth in Nb-Ti-V microalloyed steels after reheating during and after rough hot rolling
Influence of a pre-deformation on the critical strain for the onset of dynamic recrystallization of Ti-Nb microalloyed steels
Fracture mechanics based fatigue and fracture toughness evaluation of SLM Ti-6Al-4V
Optimising the transformation and yield to ultimate strength ratio of Nb-Ti micro-alloyed low carbon line pipe steels through alloy and microstructural control
Effect of Nb, Ti introduction sequence on adsorption of Nb on TiB surface and grain refinement performance of Al-4Ti-1Nb-1B
Application-driven optimization of Ti-6Al-4V alloy via customized heat treatments
Back-annealing of hot dip galvanised strip steel microalloyed with vanadium
The influence of rough rolling conditions on austenite evolution in peritectic microalloyed plate steels
Investigation of the microstructural evolution in Ti-6A1-4V alloy during cyclic hydrogenation and dehydrogenation heat treatment
Investigation of the ⁵¹V(n,d)⁵⁰Ti reaction
Influence of oxidation treatment on the corrosion behaviour of Ti-6AI-4V alloy
Microstructural evolution and its influence on mechanical properties of Ti-Nb binary alloys
Validation and application of the small sample punch test for toughness measurement of steels
The multi-pass deformation of Ti-6Al-4V
Sinter infiltration of TI-6A1-4V
An investigation of sliding wear of Ti6Al4V
Coupling effect of Nb and BN on microstructural evolution and mechanical properties of TiAl alloy
Spray‐Drying Preparation of TiNb2O7/C Anode with High‐Rate Capability
The influence of ageing treatment on the microstructural evolution and the mechanical properties of the TI-6AL-4V alloy
Die reaksies 48, 50Ti ([rho,rho'gamma])48, 50Ti BY Ep = 6 MeV EN 48, 50Ti([alfa,alfa'gamma])48, 50Ti BY E[alfa] = 12 MeV
Fretting-corrosion mechanisms of Ti6Al4V against CoCrMo in simulated body fluid under various fretting states
Osseointegration potential for heat treated 3D Ti6Al4V scaffolds seeded with mysenchymal stem cells in vitro
Investigation into hardness changes of Pd 11.1 at.% Cu and Pd 11.1 at .% Nb after heat treatments
The effects of hardness, toughness, microstructure and thermomechanical heating on the erosion of ceramic and ultrahard materials
