-
Effect of Nb, Ti introduction sequence on adsorption of Nb on TiB surface and grain refinement performance of Al-4Ti-1Nb-1B
-
Regulating creep behavior via dynamic in-situ precipitation of TiAlC phase in Ti45Al8Nb-0.6C alloy
-
Dynamic microstructure evolution of CuAlMn shape memory alloy evaluated by internal friction technique
-
Corrosion Behavior Of Cr-Ni-Mo Stainless Steel In Chemically Modified Chloride Solution
-
Tailoring microstructures and mechanical properties of cast Mg-Zn-Al-Mn alloys through alloying with Cu, Sn, and Y
-
Effect of eutectic content on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys
-
Implementation of Deep Learning-Based Segmentation for Quantitative Microstructure Analysis and 3D Reconstruction in Aluminum Alloys
-
Study of the linear distribution of absorption spectra at the Ta L3 edge in LiNb(1-x)TaxO3 crystals using X-ray beam spectral-spatial modulation using adaptive X-ray optical elements
-
Effect of critical tempering on microstructure evolution, mechanical performance, and corrosion behavior of a cast multiphase stainless steel
-
Dehumanization and Humanization in the Context of Industry 4.0 and Industry 5.0
-
Mapping Microstructure: Manifold Construction for Accelerated Materials Exploration
-
Optical and photoelectrical properties of La0.5Sr0.5Co0.9Ni0.1O3 films obtained by high-frequency laser deposition in vacuum
-
Performance of ITO, NiCr, and Pd thick film electrodes on lithium niobate under high-temperature operation
-
Numerical simulation on macrosegregation of ingots with dynamic shrinkage porosity and dendrite microstructure
-
Discovering Hidden Relationships of Alloy Properties with Manifold Learning
-
Interfacial microstructure and properties of additively manufactured composite rollers after online service
-
A review on approaches to evaluate quality of molten aluminum alloys
-
Achieving optimal strength-conductivity balance in cast Al-2.3Fe-Mg-Si alloys via Mg/Si ratio regulation
-
Thermoresponsive surface functionalization of FeRh alloy through PNIPAM grafting
-
Effects of natural and forced convections on dendritic growth in thin-walled Al-Cu alloy by counter-gravity casting: A phase-field lattice-Boltzmann study
-
A Predictive Framework for Informing Hot Isostatic Pressing of Additively Manufactured Niobium: Connecting Process, Microstructure, and Strength
-
Near Infrared Responsive Injectable Hydrogel with Bioactive Glass and Copper Nanostructures for Photothermal Antibacterial and Periodontitis Treatment
-
Control of fine grain structures and strengthening-toughening mechanisms in magnesium alloys fabricated by wire-arc directed energy deposition
-
Enhancing forming quality, refining grains, and reducing anisotropy of mechanical properties of WAAM-processed AZ31 alloy by welding torch wobbling
