Full Text Available
Access Full Text at Repository
Search Results - (model OR (mcode OR (cmcmcode OR (mmmccmcode OR (mmmcode OR (mcode OR mcode)))))) formulation
Search alternatives:
- mcode »
- cmcmcode »
- mmmccmcode »
- mmmcode »
- Go to Previous Page
- Showing 1,461 - 1,461 results of 1,461
Search Tools:
Refine Results
Page will reload when a filter is selected or excluded.- General 6 results 6
- Acetylation 4 results 4
- Background: Melon seed obtained from the fruit of Colocynthis citrullus L. is widely used in Nigeria as a soup thickener. The seed has a high oil yield (42-57%) which has been largely unexplored as excipient in pharmaceutical formulations. Objectives: To evaluate melon seed oil as a drug carrier in emulsion using diclofenac as a model drug. Methods: Melon seed oil was extracted and the physicochemical properties were characterised. The emulsions were prepared using the traditional wet and dry gum methods, and all the emulsions were evaluated using viscosity measurements, creaming rate, and in-vitro drug release. Results: Melon seed oil had a pale yellow colour, with characteristic taste, and a neutral pH. Melon seed oil exhibited higher acid, saponification and ester values than castor oil but lower iodine value indicating an edible non-drying oil, unsusceptible to auto-oxidation. Both oils achieved a great degree of emulsification with globule size < 15mm μm. Emulsions of melon seed oil were generally less viscous with a higher degree of creaming compared to castor oil emulsions. Diclofenac emulsions prepared with melon seed oil, however, were more viscous and gave the highest release of diclofenac irrespective of the method of preparation. Only diclofenac emulsion prepared with melon seed oil using the wet gum method had > 70 % release within 45 minutes thus meeting the official specification. Conclusion: Melon seed oil functioned as a drug carrier for diclofenac. Thus, it will find application in pharmaceutical emulsions. 3 results 3
- Melon seed oil 3 results 3
- Nigeria 3 results 3
- Ofada rice starch 3 results 3
- castor oil 3 results 3
- diclofenac 3 results 3
- drug carrier 3 results 3
- emulsion 3 results 3
- Binary mixtures of microcrystalline cellulose MCC (A), and lactose (L) in ratios at 75:25, 50:50, and 25:75% respectively were prepared. The binary mixtures were subjected to microscopical analysis and density measurements. The mechanical properties of paracetamol tablets formulated with the above excipients were assessed for tensile strength, bonding capacity (using the Ryshkewitch-Duckworth relation) and friability, while drug release properties were assessed for disintegration and dissolution times. The dissolution profiles were fitted into dissolution model equations to determine release mechanism and similarity of release. Microscopic analysis showed that the lactose particles were large, crystalline, and acicular in shape whereas the MCC particles were smaller and irregularly shaped. The binary mixtures had particle shape and sizes in between the parent compounds. The particle size of A25:L75 however, was larger than that of the proprietary brand, Microcelac®. Bulk and tapped densities increased with increasing amounts of MCC in the binary mixtures while particle density had an inverse relationship. Tablets containing A75:L25 had the highest tensile strength and bonding capacity and lowest friability in comparison to other binary mixtures and Microcelac®. However, tablets containing A75:L25 did not show superiority to Microcelac® in terms of paracetamol release. Its release, however, followed the Korsmeyer-Peppas model indicating a super case II transport mechanism. Only comparisons of tablet combinations of Lactose: A25:L75 and MCC: A50:L50 had a similarity factor, f2 >50. Tablets made of A75:L25 exhibited the highest mechanical and release properties of the binary mixtures, as directly compressible excipient in comparison to the parent compounds and Microcelac®. This mixture, A75:L25 therefore, could be developed for commercial use in tablet formulations. 2 results 2
- Dioscorea starches 2 results 2
- Factorial design 2 results 2
- Organic Chemistry 2 results 2
- Reliability indices are considered to be reasonable and logic ways to judge the performance of an electric power system. Reliability indices which are proposed by the IEEE are used to evaluate the performance of selected distribution systems on the national grid. Ten years of outage data (1998 - 2007) from seven selected distribution systems on the national grid were used as case studies in this research work. A generalized model is developed for a quantitative evaluation of relative indices of the national grid system. The development of the model stated with identification of the system reliability indices and estimating the contributions of system indices to the failure rate of the selected distribution system on the national grid. The computed system reliability indices are used as input parameters for the generalized model. Relative CAIDI index is computed by simulation using MATLAB 7.7 which automatically generates the graph of the relative CAIDl against names of feeders. The percentage average relative CAIDls for Ibadan, Port-Harcourt and Benin distribution systems are 71.86%, 52.79% and 75.79% respectively, thus, average reliability levels. Ilorin, Ikeja, Kaduna and Kano distribution systems have percentage average relative CAIDls of 11.95%, 39.76%, 40.17% and 41.08% respectively with poor reliability levels. With the aid of curve fitting (cf) tools, two distinct model equations were developed from which a generalized model is formulated for a quantitative evaluation of reliability indices of the national grid. The generalized model is a polynomial function whose order depends majorly on the level of industrialization of the distribution systems and the number of distribution feeders. 2 results 2
- "Optimal allocation of products to downstream locations is a major requirement for minimizing the distribution costs associated with supply chain systems. Unfortunately many supply chain managers rely on their intuition and feelings to make these allocation decisions. In this study a mathematical model was developed for minimizing the distribution cost in a multi-product 2-echleon supply chain system. The distribution system of a leading bottling plant in Nigeria was studied to understand the underlying supply chain system . Attempt was made to identify system parameters, variables, limitations, criteria so as to be able to define the distribution problem The interactions and flow of products in the system were identified and characterized as a 2 echelon supply chain system. Mathematical model of the system was developed. The problem model, a linear program formulation with three major constraints; demand, availability and company policy requirements was parameterised based on demand data product availability data, company policies and unit transportation costs to various downstream locations. The model was solved for a 12 product 8 destination case. It was observed that the model application produces 6% reduction in the distribution cost compared to the existing practice of the company. It is concluded that the model is effective to reduce or minimize distribution expenses for any multiproduct multiple destination system and fulfilling demand at various destinations. " 1 results 1
- "Road bumps play a crucial role in enforcing speed limits, thereby preventing overspeeding of vehicles. It significantly contributes to the overall road safety objective through the prevention of accidents that lead to deaths of pedestrians and damage of vehicles. Despite the importance of road bumps, very little research has been done to investigate into their design. While documentation exists on quantitative descriptions of road bumps, they offer little guidance to decision making. This work presents a unique approach to solving road bumps design problems. The results of our study reveal three important road bumps variables that influence the control of vehicle speeds. The key variables are bump height, bump width, and effective distance between two consecutive road bumps. Since vehicle speed control is the ultimate aim of this study the relationship between vehicle speed and other variables earlier mentioned is established. Vehicle speed is defined as the product of frequency at which a vehicle is moving over road bumps and the sum of effective distance between two consecutive road bumps. In the determination of bump height we assume a conical shaped curve for analysis as a matter of research strategy. Based on this, two stages of motion were analysed The first concerns the motion over the bump itself while the second relates to the motion between two consecutive road bumps. Fourier series was then used to formulate a holistic equation that combines these two stages. used trigonometric functions to model the behaviour of the first stage while with the second stage giving a functional value of zero since no changes in height are observed. We carried out vibration analysis to determine the effect of road bumps on a vehicular system. Arising from this a model component is referred to as an isolation factor. This offers guidance to the safe frequency at which vehicles could travel over road bumps. The work appears to contribute to knowledge in road bump research through the development of a novel approach to the control of vehicle speeds. Significant research progress could be made if engineering and academic communities at large appreciate our viewpoints. With this work it is apparent that varying of the assumptions made in terms of bump shape may produce high proliferation of beneficial research studies. Although this work may reveal a new way of investigation into road bump research, no claim is made for the work comprehensiveness. We expect experts to challenge some of our thoughts and ideas presented in this work " 1 results 1
- "This work considered the unsteady state drainage of fluid from a vertical column of porous material of varying porosities in an attempt to verify variation of drawndawn surface with porosity and time using riverbed sand. Kerosene was used as the flowing fluid. Mathematical assumptions ware made in connection with Darcy's law. The result showed that the experiment which was designed from the theoretical framework agreed with the theory to a large extent, However, this is not in perfect agreement with an earlier experiment which was performed using well rounded beads in which glycerine was used as the flowing fluid. A FORTRAN program was written to study the variation theoretically and this was compared with the experimental result. There exists, a degree of discrepancy between theory and experiment indicating that, the mathematical formulations did not perfectly agree with the complex earth system as compared with the bead model that was initially used. There is a need for the modification of the mathematical formulations; nonetheless, an unsteady drawndown, pattern was attained with different porosity even in medium with very complex geometry. " 1 results 1
- "This work investigated the distribution of Von Misses stress in LNG Spherical Carbon Steel Storage tanks. Using the Finite Element Method and equations of elasticity, constant thickness carbon steel spherical storage tanks of 40 in. dia. 70in. dia of 1 in. shell thickness were subjected to different loading conditions from 500 to 4000Psi in incremental of 500 Psi. Spherical triangular elements based on shallow shell formulation were used for the model. The element has five degrees of freedom at each corner node, which are the essential external degrees of freedom without the degree of freedom associated with the in-plane shell rotation. The displacement fields of the element satisfy the exact requirement of rigid body modes of motion. The FORTRAN 90 coding was developed to obtain maximum Von Misses stress distribution with the tank subjected to different internal pressure and wind loadings. The results were then compared with the yield stress of the material of the tank. Von Misses stress is used as yield criteria whether to change tank material or increase the shell material thickness if yield stress is higher than the Von-Misses Stress. Results showed Von Mises stresses for a 40 in dia. Spherical shell with 1 in shell thickness able to withstand internal pressure loading alone up to 3500 Psi after which the shell thickness will no longer be able to withstand the loading. The 70in. dia. Vessel could only withstand internal pressure loading up to 2000 Psi. Validation of Finite Element modeling was done using ASME Section VIII Div 1 standard. Modeled results were observed not to be significantly different from ASME values (P>0.05). External wind effects alone on small dia. vessels was seen to be constant for all sides of the pressure vessel. 1 results 1
- A considerable fraction of sand in Niger Delta Area of Nigeria is contaminated with crude oil. The contaminated sand is largely utilised by local contractors for the production of concrete. However, there is need to establish its suitability in concreting. Previous works have centered on hardened uncontaminated concrete in crude oil environment but not on concrete made with Crude Oil Contaminated Sand (COCS). This research was designed to evaluate the effect of COCS on some engineering properties of fresh and hardened COCS concrete. Levels of crude oil contamination were determined using gravimetry method of Total Petroleum Hydrocarbon (TPH) test on nine sand samples randomly collected from some oil spill sites in Rivers State. Based on the test results, seven types of artificially contaminated sand were prepared with crude oil levels of 0.0, 2.5, 5.0, 10.0, 15.0, 20.0 and 25.0%. Workability (slump, compacting factor and flow), compressive strength, linear shrinkage, water absorption, and fire resistance were determined using concrete cubes, flexural strength using concrete beams, and surface resistivity using concrete cylinders in accordance with standard methods. Data obtained were analysed using ANOVA at p = 0.05. Eight models were developed using historic response surface methodology to predict the engineering properties of COCS concrete at water-cement ratio (w/c) of 0.5. Also, COCS concrete design mixes with contamination level and w/c ratio suitable for reinforced concrete were formulated. The TPH varied from 8.6 ± 0.2 to 14.1 ± 1.3%. The workability of concrete was improved by the presence of COCS. Slump, compacting factor and flow of the fresh concrete increased with increase in contamination from 30.0 to 200.0 mm, 0.5 to 0.9 and 15.0 to 85.0%, respectively. Compressive strength, flexural strength, linear shrinkage and water absorption of the hardened concrete reduced with levels of contamination from 31.5 ± 2.3 to 3.5 ± 0.0 N/mm2, 5.9 ± 0.8 to 0.1 ± 0.0 N/mm2, 0.1 ± 0.0 to 0.0 cm and 0.2 to 0.0 kg respectively. At a temperature of 200.0˚C, the percentage strength reduction increased from 18.4 to 94.8% for 2.5 to 25.0% contamination. Surface resistivity ranged from 25.1 ± 0.2 to 32.3 ± 0.2 kΩ-cm. The compressive and flexural strengths of COCS concrete were reduced by more than 50.0% at crude oil contamination level greater than 10.0%. The water absorption and surface resistivity values indicated that COCS concrete exhibited greater resistance to water and chloride penetration respectively, it shrank less when compared with the uncontaminated concrete, but exhibited poor fire resistance. Coefficient of determination, R2, of the models developed ranged from 0.823 to 0.999. Concrete design mix ratio of 1part of cement to1.6 part of COCS (10.0% crude oil) to 2.4 part of coarse aggregate was found to be appropriate at 0.45 w/c. This mix gave minimum compressive strength of 21.0 N/mm2 which is acceptable for reinforced concrete structures. Concretes produced with sand contaminated with less than ten percent crude oil were found suitable for use in low strength structures. Mix re-design using lower w/c improved the strength of the concrete. 1 results 1
- A non-pre-emptive goal programming (NGP) model for weld-metal chemical composition optimization from welding-flux ingredients is proposed. The proposed model, which is the first multi-objective mathematical programming approach to welding-flux formulation, provides increased flexibility to the welding-flux formulator in several ways: (1) several conflicting objectives can be simultaneously considered, (2) the best compromise for welding-flux formulation can be achieved with minimal expenditure of resources and experimental efforts, (3) the welding-flux designer can explore various trade-off options, and (4) the lead time and cost of developing welding consumables can be drastically reduced. This paper has extended the work of Kanjilal and co-investigators by coupling it with the NGP optimisation technique so as to prescribe the welding-flux ingredient levels that will achieve optimum performance for the flux at minimum experimental efforts and cost. The feasibility and suitability of the model is illustrated with data from the literature. 1 results 1
- Aceclofenac tablets 1 results 1
- Aceclofenacsodium 1 results 1
- Acid-modification 1 results 1
- Administration of Justice 1 results 1
- Africa 1 results 1
- Agriculture 1 results 1
- Archives Management 1 results 1
- Azadirachta indica (Neem) 1 results 1
- Azadirachta indica popularly referred to as Neem plant is one of the plants found in almost all parts of the world. In Nigeria, the plant is famously consumed in its raw form, but efforts have been made to present the products in a variety of forms through processing. Despite this value addition, however, little research has been done in assessing the readiness of the consumers to pay more for the extra entrepreneurial labour in presenting the product in a more acceptable way. Thus, this study investigates household’s willingness-to-pay (WTP) for value addition in Neem-based products in Ibadan, Oyo State, Nigeria. Primary data were collected from one hundred and twenty-one (121) respondents using multi-stage sampling procedure. Data were analysed using descriptive statistics, contingent valuation method and logit regression model. Results show that 57.85% of the respondents were willing to pay highest amount for NAFDAC certification (𝑋 ̅: N615.57±116.48) followed by Brand name (53.72%; 𝑋 ̅: N538.92±328.26). Respondents were also mostly familiar with Neem powder (58.67%) and Neem soap (53.71%). However, this did not translate to usage. Age, gender, education level, occupation type and monthly expenditure were some of the factors determining WTP. The study recommends creating adequate awareness on the benefits of Neem-based products as well as formulation of policies that guarantee safety of product consumption. 1 results 1
- see all…
- SUNScholar — Stellenbosch University Repository 619 results 619
- UPSpace — University of Pretoria Institutional Repository 404 results 404
- UCTD — University of Cape Town Open Access Repository 315 results 315
- AUC Knowledge Fountain — bepress 54 results 54
- KNUSTSpace — Kwame Nkrumah University of Science & Technology (Ghana) 10 results 10