Full Text Available
Access Full Text at Repository
Search Results - (more OR (code OR (cmcccccccode OR (mmmcode OR (mmmcode OR (code OR code)))))) formulation
Search alternatives:
- code »
- cmcccccccode »
- mmmcode »
- Go to Previous Page
- Showing 1,561 - 1,563 results of 1,563
-
Trends and determinants of competitiveness in the South African table grape industry by Mtshiselwa, Ziyanda Lwanda
Published 2020Get full text
ThesisFull Text AvailableAccess Full Text at Repository
Search Tools:
Refine Results
Page will reload when a filter is selected or excluded.- Nigeria 5 results 5
- Background: Melon seed obtained from the fruit of Colocynthis citrullus L. is widely used in Nigeria as a soup thickener. The seed has a high oil yield (42-57%) which has been largely unexplored as excipient in pharmaceutical formulations. Objectives: To evaluate melon seed oil as a drug carrier in emulsion using diclofenac as a model drug. Methods: Melon seed oil was extracted and the physicochemical properties were characterised. The emulsions were prepared using the traditional wet and dry gum methods, and all the emulsions were evaluated using viscosity measurements, creaming rate, and in-vitro drug release. Results: Melon seed oil had a pale yellow colour, with characteristic taste, and a neutral pH. Melon seed oil exhibited higher acid, saponification and ester values than castor oil but lower iodine value indicating an edible non-drying oil, unsusceptible to auto-oxidation. Both oils achieved a great degree of emulsification with globule size < 15mm μm. Emulsions of melon seed oil were generally less viscous with a higher degree of creaming compared to castor oil emulsions. Diclofenac emulsions prepared with melon seed oil, however, were more viscous and gave the highest release of diclofenac irrespective of the method of preparation. Only diclofenac emulsion prepared with melon seed oil using the wet gum method had > 70 % release within 45 minutes thus meeting the official specification. Conclusion: Melon seed oil functioned as a drug carrier for diclofenac. Thus, it will find application in pharmaceutical emulsions. 3 results 3
- Melon seed oil 3 results 3
- Starch 3 results 3
- castor oil 3 results 3
- diclofenac 3 results 3
- drug carrier 3 results 3
- emulsion 3 results 3
- Alcohol 2 results 2
- Background: Harmful alcohol use is a modifiable risk factor contributing to the increasing burden of non-communicable diseases and deaths and the implementation of policies focused on primary prevention is pivotal to address this challenge. Policies with actions targeting the harmful use of alcohol have been developed in Nigeria. This study is an in-depth analysis of alcohol-related policies in Nigeria and the utilization of WHO Best Buy interventions (BBIs) and multi-sectoral action (MSA) in the formulation of these policies. Methods: A descriptive case study design and the Walt and Gilson framework of policy analysis was utilized for the research. Components of the study included a scoping review consisting of electronic search of Google and three online databases (Google Scholar, Science Direct and PubMed) to identify articles and policy documents with no language and date restrictions. Government institution provided documents which were not online. Thirteen policy documents, reports or articles relevant to the policy formulation process were identified. Other components of the study included interviews with 44 key informants (Bureaucrats and Policy Makers) using a pretested guide. The qualitative data were coded and analyzed using thematic analysis. Results: Findings revealed that policy actions to address harmful alcohol use are proposed in the 2007 Federal Road Safety Act, the Non-communicable Diseases Prevention and Control Policy and the Strategic Plan of Action. Only one of the best buy interventions, (restricted access to alcohol) is proposed in these policies. Multi-sectoral action for the formulation of alcohol-related policy was low and several relevant sectors with critical roles in policy implementation were not involved in the formulation process. Overall, alcohol currently has no holistic, health-sector led policy document to regulate the marketing, promotion of alcohol and accessibility. A major barrier is the low government budgetary allocation to support the process. Conclusions: Nigeria has few alcohol-related policies with weak multi-sectoral action. Funding constraint remains a major threat to the implementation and enforcement of proposed policy actions. 2 results 2
- Codeine-containing products 2 results 2
- Dependency 2 results 2
- Health policy 2 results 2
- Ofada rice starch 2 results 2
- Opioids misuse 2 results 2
- Policy 2 results 2
- Public health 2 results 2
- Sport Development 2 results 2
- Tablets 2 results 2
- "Mathematics has diverse applications as decision making tool. This study investigated the use of a proposed pure mathematical formulation (i.e. excluding human factor) for citing appropriately the location of political capital ci of an inhabited designated area. Digitized data of Scale map of Nigeria as a case study was used as input to a FORTRAN 90 programme codes of an equivalent least squares method mathematical formulation. The resulting simultaneous equations involving the political capital city coordinates as unknown variables were solved using Gauss Elimination Algorithm. The political capital city Cartesian coordinate prescribed as (26, 24) in grids unit for the studied case of scale map of Nigeria compared visually satisfactorily with Abuja location on the Map. The Nigeria land area cover was under-estimated by 2.3% referencing 923,768 sq km obtained from Microsoft Encarta Premium (2009). Similarly the Nigeria coastline was estimated. as 25.3% of the country's estimated perimeter (3369 krn). This mathematical tool can be used to cite the centrally located capital city or capital city relocations economically, timely, accurately and reliably. This programme can also be used for citing of capital cities for other countries and center of any irregular shapes on two dimensional plane. " 1 results 1
- "This investigation derived its strong motivation in the adoption of versions of second-order Runge-Kutta methods where there is presently dearth of relevant literature to re-establish .the complicated nature of solution of buffing oscillator dynamics. The choice of second-order Runge-Kutta methods hinged On its simplest algebraic formulation of relevant coefficients based on Taylor series expansion comparing with its higher order counterpart. Validation of FORTRAN-90 codes of algorithms was achieved by phase plots comparison reference to Dowell (1988) as standard. The nature of simulated solutions were visually determined with scatter plot of phase variables obtained from simultaneous implementation of large number of versions of second-order Runge-Kutta methods in conjunction with the corresponding literature results. Validation results are acceptable to within the accuracy limit of Runge-Kutta methods adopted. The scatter plots on phase plane for cases investigated are well structured and bounded (strange) and compare correspondingly well with literature Poincare sections. This investigation re-establishes the complex nature of solution of Duffings oscillator dynamics. Its established procedures provide an alternative Poincare section method and can be utilised for preliminary verification of system dynamics behaviour subject to confirmation by additional dynamics tests. " 1 results 1
- "This work investigated the distribution of Von Misses stress in LNG Spherical Carbon Steel Storage tanks. Using the Finite Element Method and equations of elasticity, constant thickness carbon steel spherical storage tanks of 40 in. dia. 70in. dia of 1 in. shell thickness were subjected to different loading conditions from 500 to 4000Psi in incremental of 500 Psi. Spherical triangular elements based on shallow shell formulation were used for the model. The element has five degrees of freedom at each corner node, which are the essential external degrees of freedom without the degree of freedom associated with the in-plane shell rotation. The displacement fields of the element satisfy the exact requirement of rigid body modes of motion. The FORTRAN 90 coding was developed to obtain maximum Von Misses stress distribution with the tank subjected to different internal pressure and wind loadings. The results were then compared with the yield stress of the material of the tank. Von Misses stress is used as yield criteria whether to change tank material or increase the shell material thickness if yield stress is higher than the Von-Misses Stress. Results showed Von Mises stresses for a 40 in dia. Spherical shell with 1 in shell thickness able to withstand internal pressure loading alone up to 3500 Psi after which the shell thickness will no longer be able to withstand the loading. The 70in. dia. Vessel could only withstand internal pressure loading up to 2000 Psi. Validation of Finite Element modeling was done using ASME Section VIII Div 1 standard. Modeled results were observed not to be significantly different from ASME values (P>0.05). External wind effects alone on small dia. vessels was seen to be constant for all sides of the pressure vessel. 1 results 1
- A 12-week feeding trial was conducted in 27-cm3 circular plastic tanks (50 × 34 cm) to assess the performance of juvenile African catfish (Clarias gariepinus) fed diets containing African yam bean meals (Sphenostylis stenocarpa) processed by different techniques. Five 35% crude protein diets were formulated containing no yam bean meal (control) or 34% fishmeal and 66% yam bean meal. The yam bean meals were processed in four manners: (a) ‘cooked’, sun-dried, and ground, (b) ‘toasted’, cooled, and ground, (c) ‘soaked’, cooked, sun-dried, and ground, (d) soaked, ‘dehulled’, cooked, and ground. Each treatment was replicated thrice, each replicate contained 15 fish (3.97±0.03 g, 8.70±0.97 cm). Fish were fed thrice daily at 5% of their body weight per day. Fish fed the control diet perfomed better (p<0.05) than those fed the diets containing yam bean meal. Among the diets containing yam bean meal, the ‘soaking’ treatment produced the best results. In all diets, the packed cell volume, hemoglobin concentration, red blood cell count, white blood cell count, erythrocyte sedimentation rate, mean corpuscular volume, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, lymphocytes, and neutrophils were within the ranges for healthy fish. Therefore, since the differences in fish performance between the control and the ‘soaked’ diet were less than with other yam bean diets, and because this diet was more cost-efficient than the control fishmeal diet, we conclude that soaked, cooked, and ground African yam beans can partially replace fishmeal in diets for African catfish without compromising growth or nutrient utilization 1 results 1
- A considerable fraction of sand in Niger Delta Area of Nigeria is contaminated with crude oil. The contaminated sand is largely utilised by local contractors for the production of concrete. However, there is need to establish its suitability in concreting. Previous works have centered on hardened uncontaminated concrete in crude oil environment but not on concrete made with Crude Oil Contaminated Sand (COCS). This research was designed to evaluate the effect of COCS on some engineering properties of fresh and hardened COCS concrete. Levels of crude oil contamination were determined using gravimetry method of Total Petroleum Hydrocarbon (TPH) test on nine sand samples randomly collected from some oil spill sites in Rivers State. Based on the test results, seven types of artificially contaminated sand were prepared with crude oil levels of 0.0, 2.5, 5.0, 10.0, 15.0, 20.0 and 25.0%. Workability (slump, compacting factor and flow), compressive strength, linear shrinkage, water absorption, and fire resistance were determined using concrete cubes, flexural strength using concrete beams, and surface resistivity using concrete cylinders in accordance with standard methods. Data obtained were analysed using ANOVA at p = 0.05. Eight models were developed using historic response surface methodology to predict the engineering properties of COCS concrete at water-cement ratio (w/c) of 0.5. Also, COCS concrete design mixes with contamination level and w/c ratio suitable for reinforced concrete were formulated. The TPH varied from 8.6 ± 0.2 to 14.1 ± 1.3%. The workability of concrete was improved by the presence of COCS. Slump, compacting factor and flow of the fresh concrete increased with increase in contamination from 30.0 to 200.0 mm, 0.5 to 0.9 and 15.0 to 85.0%, respectively. Compressive strength, flexural strength, linear shrinkage and water absorption of the hardened concrete reduced with levels of contamination from 31.5 ± 2.3 to 3.5 ± 0.0 N/mm2, 5.9 ± 0.8 to 0.1 ± 0.0 N/mm2, 0.1 ± 0.0 to 0.0 cm and 0.2 to 0.0 kg respectively. At a temperature of 200.0˚C, the percentage strength reduction increased from 18.4 to 94.8% for 2.5 to 25.0% contamination. Surface resistivity ranged from 25.1 ± 0.2 to 32.3 ± 0.2 kΩ-cm. The compressive and flexural strengths of COCS concrete were reduced by more than 50.0% at crude oil contamination level greater than 10.0%. The water absorption and surface resistivity values indicated that COCS concrete exhibited greater resistance to water and chloride penetration respectively, it shrank less when compared with the uncontaminated concrete, but exhibited poor fire resistance. Coefficient of determination, R2, of the models developed ranged from 0.823 to 0.999. Concrete design mix ratio of 1part of cement to1.6 part of COCS (10.0% crude oil) to 2.4 part of coarse aggregate was found to be appropriate at 0.45 w/c. This mix gave minimum compressive strength of 21.0 N/mm2 which is acceptable for reinforced concrete structures. Concretes produced with sand contaminated with less than ten percent crude oil were found suitable for use in low strength structures. Mix re-design using lower w/c improved the strength of the concrete. 1 results 1
- A pressure perturbation technique based on a simple adaptation of the Weirtheim's first order thermodynamic perturbation theory has been developed and used to formulate a generalized equation of state. The practical equation formulated was applied to pure fluids, binary systems and real samples of Niger Delta Petroleum fluids. Tuning of data is not required. The results show more accurate predictions than the commonly used SRK and PR equations. This work provides a theoretical framework for improving the accuracy of cubic equations of state. One major advantage of the generalized equation expressed in this work is the fact that it provides a theoretical framework for explaining the physical significance of the parameters in multi-parameter equations of state. Thus, in a three-parameter equation of state, while 'a' captures the attractive forces, 'b’ is the co-volume, 'c ' could represent non-physical forces. This is different from the concept of 'c' in such equations as Peng-Robinson EOS where 'c ' obviously represents an "after-the-fact" volume correction term. 1 results 1
- A study has been made of the effects of pigeon pea starch obtained from the plant Cajanus cajan (L) Millisp. (family Fabaceae) and plantain starch obtained from the unripe fruit of Musa paradisiaca L. (family Musaceae) on the compressional, mechanical, and disintegration properties of paracetamol tablets in comparison with official corn starch BP. Analysis of compressional properties was done by using density measurements, and the Heckel and Kawakita equations, whereas the mechanical properties of the tablets were evaluated by using tensile strength (T-a measure of bond strength) and brittle fracture index (BFI-a measure of lamination tendency). The ranking for the mean yield pressure, Py, for the formulations containing the different starches was generally corn < pigeon pea < plantain starch while the ranking for Pk, an inverse measure of the amount of plasticity, was pigeon pea < plantain < corn starch, which indicated that formulations containing corn starch generally exhibited the fastest onset of plastic deformation, whereas those formulations containing pigeon pea starch exhibited the highest amount of plastic deformation during tableting. The tensile strength of the tablets increased with increase in concentration of the starches while the Brittle Fracture Index decreased. The ranking for T was pigeon pea > plantain > corn starch while the ranking for BFI was corn > plantain > pigeon pea starch. The bonding capacity of the formulations was in general agreement with the tensile strength results. The disintegration time (DT) of the formulation increased with concentration of plantain and corn starches but decreased with concentration of pigeon pea starch. The general ranking of DT values was plantain < pigeon pea < corn starch. Notably, formulations containing pigeon pea starch exhibited the highest bond strength and lowest brittleness, suggesting the usefulness of pigeon pea starch in producing strong tablets with minimal lamination tendency. Plantain starch, on the other hand, would be more useful where faster disintegration of tablet is desired. The results show that the starches could be useful in various formulations depending on the intended use of the tablets with the implication that the experimental starches can be developed for commercial purposes 1 results 1
- Aceclofenac tablets 1 results 1
- Acetylation 1 results 1
- Adaptation Strategies 1 results 1
- Africa 1 results 1
- see all…
- SUNScholar — Stellenbosch University Repository 647 results 647
- UPSpace — University of Pretoria Institutional Repository 483 results 483
- UCTD — University of Cape Town Open Access Repository 302 results 302
- AUC Knowledge Fountain — bepress 42 results 42
- KNUSTSpace — Kwame Nkrumah University of Science & Technology (Ghana) 16 results 16