Moment redistribution behaviour of SFRC members with varying fibre content by Mohr, Arno Wilhelm

Get full text

Tensile and shear characterisation of the joint interface of alternative masonry by Schmidt, Jacob Michal

Get full text

The effect of innovative screw angled mini-plates on biomechanical stability of mono-cortical fixation : an in vitro model

Get full text
Get full text

Optimal reliability-based design of bulk water supply systems by Chang, Ching-Chiao

Get full text

The effect of boundary conditions and architecture on the response of cancellous bone by Hilton, Kelsey

“…Mechanical properties of these samples were determined using compression tests performed at three, quasi-static strain rates, namely: 10−3 , 10−2 and 10−1 s −1 .The specimen conditions investigated were standard specimens (with marrow, 10 mm diameter), defatted specimens (without marrow, 10 mm diameter), structurally confined specimens (with marrow and a confining collar, 10 mm diameter) and bone confined specimens (with marrow, 20 mm and 28 mm diameters). …”
Get full text

Correlation between homogenisation parameters and property evolution of AA3104 CBS after hot finish rolling by Lebakeng, Khethisa

“…Homogenisation is an important phase that controls the growth of intermetallic particles (IMPs) and dispersoids, affecting mechanical performance and texture evolution in following rolling stages. …”
Get full text

The design and implementation of a prototype digital video watermarking scheme with dynamic traitor tracing by Salotto, Antony

Get full text

Development of a device for multi-modal mechanical manipulation of cells in 2D and 3D engineering environment by Sam, Jerry

“…The mechanical cell loading device will be used to perform cellular mechanical experiments to assist in other future biophysical research and investigate the mechanics of cells under various degrees of tension, compression and shear so that a better understanding of mechanotransduction can be obtained. …”
Get full text

Assessing possible economic or operational benefits of class 3 webs without stiffeners vs class 4 webs with stiffeners in steel plate girders by Tafadzwa, Chikosha Franklin

“…Though setting an upper limit on web slenderness βw, the South African steel design standard, SANS10162-1 allows designers to ignore the limit if calculations prove that buckling of the compression flange into the web will not occur under factored load levels. …”
Get full text

Acoustic unit discovery with zero-resource applications by Van Niekerk, Benjamin Lipman

Get full text

Biogas-fuelled aqua-ammonia absorption refrigeration as a means of reducing post-harvest losses in rural Sub-Saharan Africa by Wentzel, Louis Frans Jacobus

Get full text

Evaluation of the utility of specific CXR features for diagnosis of pulmonary tuberculosis in young children using multiple readers by Ho-Yee, Ruschka

Get full text

Effect of VRM on a polymetallic sulfide ore and the flotation response as compared to conventional wet and dry rod milling by Nyakunuhwa, Hebert Simbarashe

“…The results indicated that the grind range to achieve the best flotation performance when using the VRM as a comminution device is between 60 % and 70 % passing 75 µm. …”
Get full text

Sustainable rural community: waste to business (W2B) model by Omar, Hala

“…In compression molding, the sample is subject to 50bar pressure and heat for 30min. …”
Get full text
Get full text

An investigation into the characterisation of the spalling behaviour of Polycrystalline Diamond Compact(PDC) cutters under impact loading conditions by Williams, Justin Craig

“…An experimental investigation into the identification of the spalling mechanisms of polycrystalline diamond compact (PDC) cutters and the effect of stress wave shape on the degree of spalling was performed using the split-Hopkinson pressure bar (SHPB) apparatus. …”
Get full text

Considering the Action of Degrading Water Quality on the Electrochemical Response of Sulphide Minerals by Ndamase, Nolihle

“…Ionic species that accumulate in recycled process water have been shown by previous studies to be especially deleterious to flotation performance. Such ions include Ca2+, Cu2+, Mg2+, Pb2+, SO4 2- and S2O3 2- , to name a few. …”
Get full text

Affordable High-Resolution LCD 3D Printing via Advanced Ink Formulation for Conventional and Biocompatible Microfluidic Devices by Elfarargy, Reham Gamal

“…Mechanical characterization by unconfined compression demonstrated a substantial stiffness reduction from the MPa range (17.6–27.8 MPa) to the kPa range (0.0251 MPa ≈ 25.1 kPa), supporting the design goal of producing deformable microfeatures while maintaining structural stability. …”
Get full text
Get full text

Adaptive cross approximation methods for fast analysis of Antenna Arrays by Sewraj, Keshav

Get full text

In-plane structural response of single-storey unreinforced walls constructed using alternative masonry units by Shiso, Etobo Prince

Get full text