Search Results - five function test

  1. Developing a solvent extraction process for the separation of cobalt and iron from nickel sulphate solutions by Olivier, Michiel Casparus

    Published 2011
    Get full text
    Thesis
  2. Torque Controlled Drive for Permanent Magnet Direct Current Brushless Motors by Britten, Mark David

    Published 2014
    “…The versatility of multi-function gate integrated circuits (ICs) made them ideal for implementing the commutation logic and keeping the system simple. …”
    Get full text
    Thesis
  3. The response of partially-confined right-circular cylinders to internal blast loading by Ozinsky, Adam

    Published 2016
    “…For the 0.5 l tests, the cylinders exhibit a linear increase in deformation with increasing charge mass, while the relationship is an exponential increase for the 0.75 l axial charge position. …”
    Get full text
    Thesis
  4. Whole exome sequencing: a customised approach to exploring the genetic basis of musculoskeletal soft tissue injuries by Gibbon, Andrea

    Published 2022
    “…In addition, several variants previously associated with the risk of injury including TNC rs1138545 (C>T), MMP3 rs3025058 (5A>6A), rs679620 (G>A), rs591058 (C>T) and rs650108 (G>A) and COL1A1 rs1107946 (G>T) and rs1800012 (G>T), were also prioritised for investigation in additional injury cohorts. • To functionally annotate the prioritised variants using a host of in silico bioinformatic analyses tools. …”
    Get full text
    Thesis
  5. The Efficacy of a Task-Orientated Group-Intervention Programme for Children with Specific Learning Disorder with Co-morbid Developmental Coordination Disorder by Crafford, Roche

    Published 2019
    “…Method: A quantitative, quasi-experimental design with pre- and post-tests was used. Learners were included if they presented with a primary or secondary diagnosis of SLD plus DCD (scoring at or below the 16th percentile on the Motor Assessment Battery for Children 2nd Edition (MABC-2) and a functional motor problem, as identified by the MABC checklist), aged between 6–10 years and grade 1-4. …”
    Get full text
    Thesis
  6. The effect of invasive alien plants (IAPs) biochar properties on soil quality and crop production by Mncedi, Sipho

    Published 2024
    Get full text
    Thesis
  7. Ab-initio investigation of the antimony-vacancy complex and related defects in germanium

    Published 2016
    Get full text
    Thesis
  8. An investigation into the use of stereophotogrammetry for the analysis of craniofacial dysmorphology in schizophrenia by Cousins, Michael

    Published 2015
    “…The precision and reliability of the stereophotogrammetry system was tested using a human subject. Measurements were taken using the system and directly using callipers by two operators on two separate occasions. …”
    Get full text
    Thesis
  9. Characterization of transgenic grapevine ectopically expressing plant defensin peptides by Barkhuizen, Helmien

    Published 2019
    Get full text
    Thesis
  10. Modelling subject-specific patellofemoral joint dynamics by Muller, Jacobus Hendrik

    Published 2010
    Get full text
    Thesis
  11. Low load operation of turbine-driven boiler feed pumps by Clark, John Shaun

    Published 2020
    “…The main recommendations from the case studies were as follows: i. to stroke the steam admission valves as per the design charts, ii. to test the operation of the BFPT down to 40 % generator load, iii. to keep the pump leak-off philosophy unchanged, iv. to maintain the cooling water system and condensers sufficiently to avoid poor condenser vacuum, v. to reconsider the decommissioning of the “cold reheat” steam supply, vi. and, to favour use of the BFPT over the electric feed pumps at all generator loads.…”
    Get full text
    Thesis
  12. Role of extracellular environment in mechanical properties of human cardiac fibroblasts and myofibroblasts by Haasbroek, Pieter Daniël

    Published 2022
    “…Rheological measurements indicated an elastic shear modulus of 500 ± 13 Pa and 2721 ± 39 Pa for PEG gels of 4% (m/v) and 10% (m/v), respectively. Specialised micro-indentation and uniaxial tensile testing found PEG gels of 7%, 10%, 14% and 18% concentration to have elastic moduli of 42.0 ± 2.8 kPa, 65.3 ±8.0 kPa, 78.2 ± 8.4 kPa, and 121.5 ± 11.9 kPa, respectively. …”
    Get full text
    Thesis
  13. THE REFERRAL SYSTEM AND FEEDBACK PROCESS BY MEDICAL CONSULTANTS AT THE UNIVERSITY COLLEGE HOSPITAL, IBADAN.

    Published 2012-12
    Full Text Available
    Access Repository
    Article
  14. Recovery of dissolved platinum group metals from a pregnant copper sulphate leach solution by precipitation by Mulwanda, James

    Published 2014
    Get full text
    Thesis
  15. Engineering of Pichia stipitis for enhanced xylan utilization by Den Haan, Riaan

    Published 2012
    Get full text
    Thesis
  16. Comparison between forward and backward gait retraining for mobility in individuals with mild to moderate Parkinson’s disease by Grobbelaar, Roné

    Published 2017
    Get full text
    Thesis
  17. Haploid-inducer development by CRISPR/Cas9 mediated CenH3 gene modification in Helianthus annuus (Sunflower)

    Published 2023
    Get full text
    Thesis