Full Text Available
Note: Clicking the button above will open the full text document at the original institutional repository in a new window.
Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites
Carbon nanotube reinforced polymer composites have recently been the focus of numerous research efforts. With regards to mechanical behavior, the enhancements reported are much lower than the theoretical predictions. One of the main challenges being tackled is achieving a uniform dispersion. Solvent...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Published: |
AUC Knowledge Fountain
2012
|
| Subjects: | |
| Tags: |
No Tags, Be the first to tag this record!
|
| _version_ | 1867613417236332544 |
|---|---|
| access_status_str | Open Access |
| author | Hussein, Hanady |
| author_browse | Hussein, Hanady |
| author_facet | Hussein, Hanady |
| author_sort | Hussein, Hanady |
| collection | Thesis |
| dc_rights_str_mv | The author retains all rights with regard to copyright. The author certifies that written permission from the owner(s) of third-party copyrighted matter included in the thesis, dissertation, paper, or record of study has been obtained. The author further certifies that IRB approval has been obtained for this thesis, or that IRB approval is not necessary for this thesis. Insofar as this thesis, dissertation, paper, or record of study is an educational record as defined in the Family Educational Rights and Privacy Act (FERPA) (20 USC 1232g), the author has granted consent to disclosure of it to anyone who requests a copy. |
| description | Carbon nanotube reinforced polymer composites have recently been the focus of numerous research efforts. With regards to mechanical behavior, the enhancements reported are much lower than the theoretical predictions. One of the main challenges being tackled is achieving a uniform dispersion. Solvent mixing has been used extensively. Concerns, however, arose that unevaported solvents could negatively affect the mechanical properties. In this thesis, solvent and dry mixing for dispersing MWNT powders within the polymer prior to fabrication by melt processing are compared. Various weight fractions of CNT are added and the effect on the mechanical, crystallization and flow properties of the resulting composites is investigated. In both cases, enhancements in yield strength compared to the neat polymer were observed. It was found that dry mixing produced composites with the highest yield strength at 0.5 wt % CNT, whereas solvent mixing produced a similar enhancement at CNT contents of 1 wt %. It is believed that this difference is primarily dependent on the dispersion of CNTs within the polymer matrix. On the other hand, ductility was much higher for solvent mixed samples compared to dry mixed ones. FESEM analysis showed the presence of clusters in large wt % CNT samples produced by dry mixing. All samples produced by solvent mixing were found to contain homogeneously distributed CNTs. In most cases, CNT pull-out was found to be the dominant failure mechanism and may explain the limited enhancement observed. Further mechanical characterization was done using nanoindentation. The hardness and indentation modulus were calculated and they appear to concur with the tension test results. The crystallinity of the polypropylene matrix was also investigated before and after the addition of the CNTs. It was found that adding the lowest CNT wt% led to an increase in the crystallization temperature. A gradual increase in the crystallization temperature occurred with the addition of higher CNT loadings. This indicated that the CNTs acted as nucleating agents for the polypropylene crystals. In the plastics industry the flow properties of the polymer is very important. Melt flow index measurements were used in this study to analyze this property. A decreasing trend in the melt flow index i.e. increasing viscosity was found for the solvent- mixed samples which have superior dispersion expected to contribute to decreasing the viscosity of the molten polymer. However, the effect of the addition of the CNTs overcame this and resulted in the increase of the viscosity. This occurrence could be due to the dispersion process of solvent mixing preceding the shear mixing stage. Another indication for the poor dispersion of CNT in the dry-mixed samples was that the decrease in the melt flow index of the produced samples is very limited if not negligible. |
| format | Thesis |
| id | oai:fount.aucegypt.edu:etds-2269 |
| institution | American University in Cairo (Egypt) |
| last_indexed | 2026-06-10T12:35:48.888Z |
| license_str | Other — see source repository |
| provenance_str_mv | Harvested via OAI-PMH from AUC Knowledge Fountain — bepress |
| publishDate | 2012 |
| publishDateRange | 2012 |
| publishDateSort | 2012 |
| publisher | AUC Knowledge Fountain |
| publisherStr | AUC Knowledge Fountain |
| record_format | dspace |
| source_str | AUC Knowledge Fountain — bepress |
| spelling | oai:fount.aucegypt.edu:etds-2269 Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites Hussein, Hanady Carbon nanotube reinforced polymer composites have recently been the focus of numerous research efforts. With regards to mechanical behavior, the enhancements reported are much lower than the theoretical predictions. One of the main challenges being tackled is achieving a uniform dispersion. Solvent mixing has been used extensively. Concerns, however, arose that unevaported solvents could negatively affect the mechanical properties. In this thesis, solvent and dry mixing for dispersing MWNT powders within the polymer prior to fabrication by melt processing are compared. Various weight fractions of CNT are added and the effect on the mechanical, crystallization and flow properties of the resulting composites is investigated. In both cases, enhancements in yield strength compared to the neat polymer were observed. It was found that dry mixing produced composites with the highest yield strength at 0.5 wt % CNT, whereas solvent mixing produced a similar enhancement at CNT contents of 1 wt %. It is believed that this difference is primarily dependent on the dispersion of CNTs within the polymer matrix. On the other hand, ductility was much higher for solvent mixed samples compared to dry mixed ones. FESEM analysis showed the presence of clusters in large wt % CNT samples produced by dry mixing. All samples produced by solvent mixing were found to contain homogeneously distributed CNTs. In most cases, CNT pull-out was found to be the dominant failure mechanism and may explain the limited enhancement observed. Further mechanical characterization was done using nanoindentation. The hardness and indentation modulus were calculated and they appear to concur with the tension test results. The crystallinity of the polypropylene matrix was also investigated before and after the addition of the CNTs. It was found that adding the lowest CNT wt% led to an increase in the crystallization temperature. A gradual increase in the crystallization temperature occurred with the addition of higher CNT loadings. This indicated that the CNTs acted as nucleating agents for the polypropylene crystals. In the plastics industry the flow properties of the polymer is very important. Melt flow index measurements were used in this study to analyze this property. A decreasing trend in the melt flow index i.e. increasing viscosity was found for the solvent- mixed samples which have superior dispersion expected to contribute to decreasing the viscosity of the molten polymer. However, the effect of the addition of the CNTs overcame this and resulted in the increase of the viscosity. This occurrence could be due to the dispersion process of solvent mixing preceding the shear mixing stage. Another indication for the poor dispersion of CNT in the dry-mixed samples was that the decrease in the melt flow index of the produced samples is very limited if not negligible. 2012-02-01T08:00:00Z thesis application/pdf https://fount.aucegypt.edu/etds/1270 https://fount.aucegypt.edu/context/etds/article/2269/viewcontent/Hanady_20MSc_2031_01_12.pdf The author retains all rights with regard to copyright. The author certifies that written permission from the owner(s) of third-party copyrighted matter included in the thesis, dissertation, paper, or record of study has been obtained. The author further certifies that IRB approval has been obtained for this thesis, or that IRB approval is not necessary for this thesis. Insofar as this thesis, dissertation, paper, or record of study is an educational record as defined in the Family Educational Rights and Privacy Act (FERPA) (20 USC 1232g), the author has granted consent to disclosure of it to anyone who requests a copy. Theses and Dissertations AUC Knowledge Fountain Mechanical properties Carbon notube-reinforced polypropylene matrix composites |
| spellingShingle | Mechanical properties Carbon notube-reinforced polypropylene matrix composites Hussein, Hanady Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title | Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title_full | Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title_fullStr | Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title_full_unstemmed | Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title_short | Fabrication and characterization of carbon nanotube-reinforced polypropylene matrix composites |
| title_sort | fabrication and characterization of carbon nanotube reinforced polypropylene matrix composites |
| topic | Mechanical properties Carbon notube-reinforced polypropylene matrix composites |
| url | https://fount.aucegypt.edu/etds/1270 https://fount.aucegypt.edu/context/etds/article/2269/viewcontent/Hanady_20MSc_2031_01_12.pdf |
| work_keys_str_mv | AT husseinhanady fabricationandcharacterizationofcarbonnanotubereinforcedpolypropylenematrixcomposites |