Full Text Available

Note: Clicking the button above will open the full text document at the original institutional repository in a new window.

Characterization of gold catalysts for methanol synthesis

Includes bibliographical references.

Saved in:
Bibliographic Details
Main Author: Van Heerden, Tracey
Other Authors: Van Steen, Eric
Format: Thesis
Language:English
Published: Centre for Catalysis Research 2015
Subjects:
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1867613151961284608
access_status_str Open Access
author Van Heerden, Tracey
author2 Van Steen, Eric
author_browse Van Heerden, Tracey
Van Steen, Eric
author_facet Van Steen, Eric
Van Heerden, Tracey
author_sort Van Heerden, Tracey
collection Thesis
description Includes bibliographical references.
format Thesis
id oai:open.uct.ac.za:11427/14577
institution University of Cape Town (South Africa)
language eng
last_indexed 2026-06-10T12:31:35.974Z
license_str Not specified — see source repository
provenance_str_mv Harvested via OAI-PMH from UCTD — University of Cape Town Open Access Repository
publishDate 2015
publishDateRange 2015
publishDateSort 2015
publisher Centre for Catalysis Research
publisherStr Centre for Catalysis Research
record_format dspace
source_str UCTD — University of Cape Town Open Access Repository
spelling oai:open.uct.ac.za:11427/14577 Characterization of gold catalysts for methanol synthesis Van Heerden, Tracey Van Steen, Eric Case, Jenni Chemical Engineering Includes bibliographical references. The activity (per mass of catalyst) of supported gold catalysts across a range of reduction and oxidation reactions is significantly affected by the average crystallite size of the gold crystallites in the catalyst. Supported gold catalysts are most commonly characterized for particle size using TEM and XRD. Both of these methods can have a large degree of inaccuracy associated with them at low metal loadings and for catalysts containing small gold crystallites. In this study oxygen chemisorption was used as an additional method to characterize supported gold catalysts to complement electron microscope techniques. Agreement between the results from these different methods was obtained only with regard to the order of magnitude range of crystallite size. The oxygen chemisorption can be used to estimate the mass fraction of gold present as nano-crystallites (typically less than 1%) implying a large room for improvement in catalyst preparation technique. In this study a range of supported gold catalysts were prepared by ion exchange, varying a range of preparation variables, including gold concentration in the precursor solution, washing procedure using an aqueous ammonia solution, as well as drying and calcination procedures. The washing procedure and in particular the concentration of ammonia and the duration affected the final metal loading of the catalyst. TEM analyses show crystallite size distributions between 2-5nm for all catalysts excepting those which were not washed using an aqueous ammonia solution and which did not show any small crystallites. Only the total omission of the ammonia wash resulted in a significant change in the gold crystallite sizes observed on TEM-images. Further characterization with SEM showed that catalysts that appeared identical on the TEM-images also contained large 50-500nm crystallites. This additional method of characterisation using SEM allowed for the identification of significant differences between catalysts upon varying the preparation method. Catalyst drying was also shown to be a crucial step in the catalyst preparation method, with SEM images displaying only small well-distributed gold crystallites for catalysts dried in the rotary evaporator. Two of the catalysts were then tested for their activity and selectivity in the hydrogenation of CO or CO 2. Although it has been shown that the production of methanol from CO (and CO 2) can be catalysed by gold particles with crystallite sizes below 5nm (Haruta, 1997), this reaction has received comparatively little attention compared to the more extensively studied CO oxidation reaction. Testing was done over a range of temperatures (200 - 350°C) at a pressure of 30bar. The obtained methanol yields and selectivities are comparable to reported values in literature. The hydrogenation of CO 2 was shown to have higher yields and selectivities to methanol than the hydrogenation of CO over the same catalyst. The preparation of the catalyst was shown to have an effect on the activity and selectivity, with the catalyst dried in the rotary evaporator having a higher yield and selectivity to methanol, while also forming a larger variety of products than the catalyst dried in the oven. 2015-10-30T10:50:57Z 2015-10-30T10:50:57Z 2012 Master Thesis Masters MSc http://hdl.handle.net/11427/14577 eng application/pdf Centre for Catalysis Research Faculty of Engineering and the Built Environment University of Cape Town
spellingShingle Chemical Engineering
Van Heerden, Tracey
Characterization of gold catalysts for methanol synthesis
thesis_degree_str Master's
title Characterization of gold catalysts for methanol synthesis
title_full Characterization of gold catalysts for methanol synthesis
title_fullStr Characterization of gold catalysts for methanol synthesis
title_full_unstemmed Characterization of gold catalysts for methanol synthesis
title_short Characterization of gold catalysts for methanol synthesis
title_sort characterization of gold catalysts for methanol synthesis
topic Chemical Engineering
url http://hdl.handle.net/11427/14577
work_keys_str_mv AT vanheerdentracey characterizationofgoldcatalystsformethanolsynthesis