Full Text Available
Note: Clicking the button above will open the full text document at the original institutional repository in a new window.
The design of a two-element radio interferometer using satellite TV equipment
This research presents the design of a two-element radio interferometer capable of performing complex correlation. With the development of sophisticated radio astronomy instruments, particularly in South Africa, there is a need to develop an affordable educational instrument which can be used to dem...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | English |
| Published: |
Department of Electrical Engineering
2021
|
| Subjects: | |
| Tags: |
No Tags, Be the first to tag this record!
|
| _version_ | 1867613190238502912 |
|---|---|
| access_status_str | Open Access |
| author | Latief, Tauriq |
| author2 | Winberg, Simon |
| author_browse | Latief, Tauriq Winberg, Simon |
| author_facet | Winberg, Simon Latief, Tauriq |
| author_sort | Latief, Tauriq |
| collection | Thesis |
| description | This research presents the design of a two-element radio interferometer capable of performing complex correlation. With the development of sophisticated radio astronomy instruments, particularly in South Africa, there is a need to develop an affordable educational instrument which can be used to demonstrate the fundamental concepts of radio interferometry to university students. The mass production of satellite TV equipment has resulted in relatively sensitive radio frequency (RF) equipment such as parabolic reflector dishes and low-noise block down-converters (LNBs) being available at significantly reduced costs. This served as the front-end of the interferometer which was used to observe the sun between 10.70 GHz - 12.75 GHz (RF). The LNB then down-converted these to an intermediate frequency (IF) between 0.95 GHz - 2.15 GHz. The LNBs were modified to make use of a common 25 MHz reference, which ensured that the observed fringes were only as a result of the source's geometric time delay. A power detector was also designed since the adding interferometer architecture was chosen. This power detector included the Analog Devices LT 5534 power detector integrated circuit (IC) and a Teensy 3.6 microcontroller. The calibrated power detector could detect signals as weak as - 60 dBm and showed less than 21 mV error in output for input signals in the range [- 50 dBm, -30 dBm]. The modified LNBs experienced issues, in particular the presence of a spurious LO signal, which distorted initial observations of the sun. This was resolved by the design and manufacture of narrowband hairpin filters and quarterwavelength stub filters which were used to isolate the IF band between 1.05 GHz - 1.15 GHz (corresponding RF between 10.80 GHz - 10.90 GHz). This also improved the interferometer's resolution. A series of filter-integrated Wilkinson power dividers and branchline couplers were designed to filter and further separate signals into in-phase and quadrature-phase (I-Q) components - these were required for complex correlation. The integrated quarter-wavelength stub filter and Wilkinson power divider achieved a maximum amplitude imbalance of 0.13 dB and phase imbalance of 0.9◦ between output ports. The integrated quarter-wavelength stub filter and branchline coupler achieved a maximum amplitude imbalance of 0.13 dB and phase imbalance of 91.1◦ between output ports. These results closely agreed with the simulated performance. First light was observed on the 5th December 2020 when the sun was successfully detected using the coherent two-element interferometer along a 1.1 m baseline. Other tests included using the observed fringe phase to verify the physical baseline. A theoretical baseline of 1.11 m was calculated for a physical baseline of 1.3 m indicating an error of less than 0.2 m. The sun's fringe frequency and amplitude was also observed for varying baselines - the sun was resolved along a 3 m baseline. Finally, full-system observations of the sun were conducted. These included observing the sun's cosine and sine fringes, which indicated that the analogue complex correlator was operating correctly. Thus, the primary goal of this project had been fulfilled. Specifically, developing a low-cost, educational two-element radio interferometer capable of detecting the sun. |
| format | Thesis |
| id | oai:open.uct.ac.za:11427/33756 |
| institution | University of Cape Town (South Africa) |
| language | eng |
| last_indexed | 2026-06-10T12:32:12.136Z |
| license_str | Not specified — see source repository |
| provenance_str_mv | Harvested via OAI-PMH from UCTD — University of Cape Town Open Access Repository |
| publishDate | 2021 |
| publishDateRange | 2021 |
| publishDateSort | 2021 |
| publisher | Department of Electrical Engineering |
| publisherStr | Department of Electrical Engineering |
| record_format | dspace |
| source_str | UCTD — University of Cape Town Open Access Repository |
| spelling | oai:open.uct.ac.za:11427/33756 The design of a two-element radio interferometer using satellite TV equipment Latief, Tauriq Winberg, Simon Mishra, Amit Electrical Engineering This research presents the design of a two-element radio interferometer capable of performing complex correlation. With the development of sophisticated radio astronomy instruments, particularly in South Africa, there is a need to develop an affordable educational instrument which can be used to demonstrate the fundamental concepts of radio interferometry to university students. The mass production of satellite TV equipment has resulted in relatively sensitive radio frequency (RF) equipment such as parabolic reflector dishes and low-noise block down-converters (LNBs) being available at significantly reduced costs. This served as the front-end of the interferometer which was used to observe the sun between 10.70 GHz - 12.75 GHz (RF). The LNB then down-converted these to an intermediate frequency (IF) between 0.95 GHz - 2.15 GHz. The LNBs were modified to make use of a common 25 MHz reference, which ensured that the observed fringes were only as a result of the source's geometric time delay. A power detector was also designed since the adding interferometer architecture was chosen. This power detector included the Analog Devices LT 5534 power detector integrated circuit (IC) and a Teensy 3.6 microcontroller. The calibrated power detector could detect signals as weak as - 60 dBm and showed less than 21 mV error in output for input signals in the range [- 50 dBm, -30 dBm]. The modified LNBs experienced issues, in particular the presence of a spurious LO signal, which distorted initial observations of the sun. This was resolved by the design and manufacture of narrowband hairpin filters and quarterwavelength stub filters which were used to isolate the IF band between 1.05 GHz - 1.15 GHz (corresponding RF between 10.80 GHz - 10.90 GHz). This also improved the interferometer's resolution. A series of filter-integrated Wilkinson power dividers and branchline couplers were designed to filter and further separate signals into in-phase and quadrature-phase (I-Q) components - these were required for complex correlation. The integrated quarter-wavelength stub filter and Wilkinson power divider achieved a maximum amplitude imbalance of 0.13 dB and phase imbalance of 0.9◦ between output ports. The integrated quarter-wavelength stub filter and branchline coupler achieved a maximum amplitude imbalance of 0.13 dB and phase imbalance of 91.1◦ between output ports. These results closely agreed with the simulated performance. First light was observed on the 5th December 2020 when the sun was successfully detected using the coherent two-element interferometer along a 1.1 m baseline. Other tests included using the observed fringe phase to verify the physical baseline. A theoretical baseline of 1.11 m was calculated for a physical baseline of 1.3 m indicating an error of less than 0.2 m. The sun's fringe frequency and amplitude was also observed for varying baselines - the sun was resolved along a 3 m baseline. Finally, full-system observations of the sun were conducted. These included observing the sun's cosine and sine fringes, which indicated that the analogue complex correlator was operating correctly. Thus, the primary goal of this project had been fulfilled. Specifically, developing a low-cost, educational two-element radio interferometer capable of detecting the sun. 2021-08-12T12:51:01Z 2021-08-12T12:51:01Z 2021 2021-08-12T12:50:18Z Master Thesis Masters MSc http://hdl.handle.net/11427/33756 eng application/pdf Department of Electrical Engineering Faculty of Engineering and the Built Environment |
| spellingShingle | Electrical Engineering Latief, Tauriq The design of a two-element radio interferometer using satellite TV equipment |
| thesis_degree_str | Master's |
| title | The design of a two-element radio interferometer using satellite TV equipment |
| title_full | The design of a two-element radio interferometer using satellite TV equipment |
| title_fullStr | The design of a two-element radio interferometer using satellite TV equipment |
| title_full_unstemmed | The design of a two-element radio interferometer using satellite TV equipment |
| title_short | The design of a two-element radio interferometer using satellite TV equipment |
| title_sort | design of a two element radio interferometer using satellite tv equipment |
| topic | Electrical Engineering |
| url | http://hdl.handle.net/11427/33756 |
| work_keys_str_mv | AT latieftauriq thedesignofatwoelementradiointerferometerusingsatellitetvequipment AT latieftauriq designofatwoelementradiointerferometerusingsatellitetvequipment |